TC Electronic PEQ 3000 NATIVE Guia De Inicio Rapido página 9

16
PEQ 3000
Connecting the PEQ 3000-DT
Desktop Controller (optional)
Getting the Desktop Controller up and running couldn't get any easier. Plug the included
USB cable into the unit's rear micro-USB port, and connect the other end to a free USB
port on your computer. The Desktop Controller is bus powered so no other power cables
are necessary, and no additional drivers need to be manually installed.
PEQ300-DT
Laptop
The Desktop Controller will light up upon successful connection. You can now apply the
plug-in to a channel in your DAW to begin using the effect. This process may vary slightly
depending on your software, but generally should require these steps:
• Select a channel or bus in your DAW to which you would like to add the effect Access
the mixer page where you should see a section dedicated to effect slots
• Open the menu where you can select from a list of effect types, which probably
includes many stock plugins that are included with the DAW. There should be
submenu to view general VST/AU/AAX options.
• The plug-in will likely be found in a dedicated TC Electronic folder. Select the
PEQ 3000 and it will now be added to the signal chain.
Double click on the effect slot that contains the PEQ 3000-DT to view the plug-in UI.
There should be a green link icon at the bottom, and text that indicates successful
connection between the plug-in and the Desktop Controller.
Operating the PEQ 3000
After you have installed the plug-in, activated the iLok license and optionally connected
the PEQ 3000-DT Desktop Controller via USB, you can begin inserting the plug-in to
your tracks.
Adjustments to the effect are done in two ways. Either by using the plug-in user interface
or via the physical Desktop Controller.
Download the full user manual from www.tcelectronic.com/peq3000-dt/support/ to
learn about all the details of both the plug-in and the Desktop Controller functionality.
17
Quick Start Guide