Trevi PDX 1409 S2 Guía Rápida página 17

ENGLISH
NOTE: use only the supplied power supply, different devices may have different polarity and/or voltages.
2. The battery charge indicator on the front (24) will turn red. When charging is complete, the indicator
will turn off.
The time for a full charge is approximately 4 hours.
When the battery is fully charged, the player's autonomy is approximately 3 hours in DVD mode.
WARNING FOR CORRECT USE OF THE RECHARGEABLE BATTERY
- Recharge the battery at a temperature between 5° C and 35° C.
- Do not extend the recharge beyond the indicated times to avoid the risk of overheating and bursting.
- Charging the battery beyond the indicated times or a prolonged period of inactivity can reduce its
duration.
- The rechargeable battery is subject to wear and its capacity gradually decreases.
- To extend the life of the battery, use it when it is fully charged until it is completely discharged, then
fully charge it again before using it again. Charging a battery that is not completely depleted will
shorten its life. In this case, repeat the complete upload/download cycle several times.
- Avoid charging the battery at night.
POWER SUPPLY 12V
The supplied cable allows you to power the device with the car battery via the cigarette lighter socket.
Insert the plug into the external power socket (23) and the appropriate adapter into the car's cigarette
lighter socket. At the same time as using the reader via the cigarette lighter cable supplied, the battery
will also be recharged.
NOTE: it is not recommended to use the reader for a long time with the engine off to avoid draining the car
battery.
CONNECTION TO THE TV
If you want to connect the device to a TV, you must use the A / V cable (Jack/RCA).
1. Connect the jack of the A/V cable to the AV OUT socket (20) of the player;
2. Connect the RCA connectors of the A/V cable to the AV input of the TV, respecting the colors of the
signals: yellow for the video, red for the right audio channel and white for the left audio channel
(consult your TV manual).
USE DEVICE AS A MONITOR
If you want to use the device as a monitor, you must use the A/V cable (Jack/RCA).
1. Connect the jack of the A/V cable to the AV IN socket (21) of the player;
2. Connect the RCA connectors of the A/V cable to the AV output of the TV, respecting the colors of
the signals: yellow for the video, red for the right audio channel and white for the left audio channel
(consult your TV manual).
To the power outlet
To the car cigarette
lighter socket
PDX 1409 S2
_
17
PAG