Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION.
- Make the preparation of the vacuum cleaner (previous section: preparation for use).
- Plug the vacuum cleaner into the electric current.
- Press the On / Off button to turn on and start aspirating.
- Adjust the airflow of the handle flange (closed plus suction, open less suction).
- To switch off, press the On / Off button again.
Brush: accessory for floors and carpets.
Important note:
The maximum non-stop vacuuming time is 5 minutes.
You should turn off the vacuum and let the motor cool down after every 5 minutes of use.
If you do not comply with this rule and the motor burns out, the warranty is automatically voided.
CLEANING THE DEPOSIT AND FILTER.
1. Press the tank anchor button and remove it.
2. Open the tank by pressing the opening tab.
3. Remove the filter and empty all the dust accumulated in the tank.
4. Clean the filter under the tap and let it dry very well before reassembling it.
5. Reassemble everything in the same order but in reverse.
- Check the dust collector tank.
- The moment you reach the maximum level you should
proceed to its emptying and, if necessary, clean the filter.
- If you notice that the appliance loses suction power,
must stop and clean all filters
Publicidad
