Pur Line NTW-08 Manual De Instrucciones página 9

WALL MOUNTING
1. Mark on the wall the 4 holes to be made with the drill The horizontal separation between the holes must be
410mm and vertically 22 0 mm.
2. Once the holes have been marked, drill the 4 holes of 8 mm diameter.
3. Detach the wall brackets as shown in the image.
5. Fix the internal accessories and the 4 front
accessories to the towel rack with the screws, then
attach the decorative cover so that the screw is not
visible.
EN
4. Insert the plug into the wall hole, then attach the
outer accessory to the wall brackets and use the
wall screw to fix the accessory properly. Repeat the
step for the rest of the holes.
6. Once the accessories are attached to the towel
rack, insert the internal accessories to the external
ones on the wall, adjust the distance you want and
fix the fixing screws so that it is well secured.
7