Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE – CLEANING ( Fig. 8)
ATTENTION: before starting any work or maintenance on the machine, disconnect all electrical connections.
When you assemble the rotavator, the knives cutting part should be oriented clockwise.
The tightening pins must be fixed as shown in picture (8).
In order to remove a stone or other object, embedded by chance into the tines, take the pins away (1). For such operation, please use protection
gloves.
Clean the cutters after use with a dry cloth or brush to remove mud and dirt; do not use water.
Check the cutter; if excessively worn or bent, they must be replaced.
Please check regularly that all nuts and screws are well tightened; this is to guarantee the safe working of the unit.
DRIVING CONTROLS DESCRIPTION (Fig. 1)
A) Switch and start button. B) handlebar. C) CE label. D) transport wheels. E) cultivator blade. F) protection electric motor.
TECHNICAL FEATURES
Transmission : worm-screw-helical gear (in oil-bath) for transmission to drive shaft.
Engine : voltage rating 230V, 50 Hz, Power 900 W.
Cultivator: with hoes, working width 340 mm., complete with safety case. Cutter diameter mm. 250. Max tiller speed: 140 RPM. Weight without
packaging 15 Kg.
Safety device: all cultivators are equipped with a safety device which disengages the transmission automatically when the corresponding control lever
is released.
NOISE AND VIBRATION LEVEL
Noise level when working in compliance : L
Measured sound power level : L
Measured sound power level guaranteed : L
Right side handlebar vibration: a
Level detected : a
= 2,68 m/s², uncertainty value K = ±1,34 m/s
w
ACCESSORIES ON REQUEST
De-Thatcher: it is good to eliminate the grass entanglement and musk from fields and gardens.
The de-Thatcher has to be fixed on the hob spindle of the machine with an elastic plug, after the disassembling of the standard cutter.
Ballast: to hoe deeply.
Ridging plough: it is necessary to use it to cut small furrows before sowing.
It is strictly forbidden to use any other accessories except the ORIGINAL accessories.
ATTENTION! When you assemble the accessories check carefully the rotation direction of the accessories.
= 73 dB (A) , with a uncertainty value K = ±1 dB (A).
pa
= 85 dB (A) , with a uncertainty value K = ±1,1 dB (A).
wa
= 93 dB (A).
wa
= 0,83 m/s² ; a
= 2,47 m/s² ; a
hw,x
hw,y
2
= 0,60 m/s².
hw,z
.
EN
15
Publicidad
