Remington Omniblade Precision HG4001 Manual De Instrucciones página 7

Nose and ear:

1. Fit the micro trimmer.

2. Insert the attachment gently into the nostril or ear.

3. Gently move the attachment in and out while rotating the body of the groomer at the

same time.

•

Don't insert the attachment more than 6 mm.

•

Wash the attachment after each use.

Eyebrow:

1. Slide the desired eyebrow comb attachment (3 or 6 mm) over the trimmer head (Fig. C).

2. Carefully guide the attachment to remove any stray or longer hairs from the eyebrow.

3. To completely remove hairs, let the attachment touch the skin then move over the

desired area.

CARE FOR YOUR GROOMER

Care for your product to ensure a long lasting performance. We recommend that you clean

your groomer after each use.

AFTER EACH USE

•

Brush any accumulated hairs from the groomer and attachment heads.

•

The easiest and most hygienic way to clean the groomer is by detaching the head from

the groomer body and rinsing the head with warm water.

•

Place one or two drops of cutter oil or sewing machine oil on the blades.

•

Turn the device on to distribute the oil evenly, wipe off any excess oil.

BATTERY REMOVAL

We strongly recommend that a professional removes the rechargeable battery. Parts of

the shaver case, and tools have sharp edges and may cause injury if not handled correctly.

•

The rechargeable battery must be removed from the appliance before it is scrapped.

1. Ensure the trimmer is discharged of all power. To do this, operate the device until it

stops.

2. Remove any attachments.

3. Pry off the switch button/switch cover.

4. Unscrew the 2 screws under the cover then remove the lower housing.

5. Slide out the battery assembly.

6. Unscrew the 2 screws from the cover then remove the battery.

•

The battery is to be disposed of safely.

•

Do not attempt to operate the device once you have opened it.

ENGLISH