DeLonghi HVY Instrucciones Para El Uso página 7

EN
Voltage Wattage
ELECTRICAL CONNECTION
- BEFORE PLUGGING INTO THE MAINS, MAKE SURE THE VOLTAGE OF YOUR MAINS SUP-
PLY CORRESPONDS TO THE VALUE IN VOLTS (V) INDICATED ON THE APPLIANCE AND
THAT THE SOCKET AND POWER LINE ARE APPROPRIATE FOR THE LOAD REQUIRED.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EC ON ELECTROMAGNETIC
COMPATIBILITY.
INSTALLATION
The appliance must be used in the portable configuration only. The appliance is designed and pro-
duced for domestic use only.
- If the appliance is used in a room with bath or shower, respect the "safety distances" shown
in fig. 1 and always install away from taps, basins, showers, etc. The appliance must not be
placed immediately under a fixed power socket.
FUNCTIONING AND USE
M
ODELS WITH FUNCTION SELECTOR AND THERMOSTAT
Make sure the appliance is off before plugging into the mains.
1. Plug the appliance into the mains.
2. Turn the thermostat dial
3. Summer mode (fan only): turn the function selector
4. Low power operation: turn the function selector
5. Medium power operation: turn the function selector
6. High power operation: turn the function selector
7. Switching off: turn the function selector
the position, then unplug from the mains socket.
NB: In models with two power levels only, position 2 corresponds to maximum power.
Setting the thermostat:
Position the thermostat
turn the thermostat dial
off). The thermostat will then keep room temperature at the selected level automatically.
1
Frost prevention mode
With the function selector
the thermostat dial
1
preventing freezing with minimal energy consumption.
M
ODELS WITH THERMOSTAT ONLY
To switch the appliance on, turn the thermostat dial
on).
To switch the appliance off completely, turn the knob to the
mains.
For the frost prevention function, turn the thermostat dial
pliance plugged into the mains.
MAINTENANCE
- Always unplug from the mains socket before cleaning.
- Clean the air intake and outlet grilles regularly.
- Do not use abrasive products or solvents to clean the appliance.
See rating plate
to maximum.
1
2
1
on maximum. When the room has reached the required temperature,
1
slowly anticlockwise until you hear a click (the fan and the light go
1
2
2
in position 3 (position 2 for models with two power levels only) and
2
in position , the appliance maintains room temperature at about 5°C,
2
1
1
to the
2
1
to position 1.
2
1
to position 2.
2
to position 3.
2
to the "0" position and the thermostat dial
2
clockwise to maximum (the light comes
1
2
to the
1
2
6
position (the light comes on).
position, then unplug from the
position and leave the ap-
to
1
2