Publicidad
Idiomas disponibles
Idiomas disponibles
3- Exploded view
1.
Grids
2.
Blades
3.
Swing Button
4.
Engine
5.
Control box
6.
Button panel
7.
Screws
8.
Nut
9.
Roe
10.
Inner tube
11.
Outer tube
12.
Base plug
13.
Cross base supports
14.
Height adjustment
4-Assembly
The only tool required for assembly is a Phillips screwdriver.
1. Base mount:
Firstly, loosen and remove the four screws of the brackets, then cross them, first A
and then B. Align the four holes of the brackets to the base, at the same time, align
the bracket A with the bracket bar , tighten the four screws and insert the base
cover downwards, over the supports.
2. Assembling the control box:
"Caution", never remove the stopper from the inner tube, or loosen the screws.
1) Loosen the control box screw by turning it counterclockwise.
2) Put the hole in the bottom of the control box over the inner tube.
3) Tighten the screws of the control box.
9
Publicidad
