Manta GPS470 Manual De Usuario página 14

Mounting the Unit in your Car
Warning!
Device must be mounted in a location that does not obscure
the drivers vision, impede use of the car's controls or impede the
operation of the car's airbags. Screw the car mount into the back of
the unit as shown below.
Car Adapter
When using your navigation in the car we recommend that you
always use the car adapter to power the unit, especially on long
journeys. Plug the car adapter into the socket marked 5V on the
rear of the unit. Plug the other end on the adapter into the car's 12V
accessory socket. The illustration on the next page shows a typical
installation. If possible fix the power cable so that it does not obscure
instruments or controls and does not cause a tripping hazard.
EN EN
14