Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
ERASMUS
REF: A45883001A | A45883001B | A45883001S
A45884001A | A45884001B | A45884001S
GENERAL SAFETY INFORMATION
_____________________________________________________________________________
>
For the connection to the power supply, use a Class II screw
terminal block (completely insulated) in accordance with EN 60998-
2-1, with a connection capacity of 2 x 2.5 mm2 and a rated voltage
of 250V.
>
Connect the fixed wiring conductors respecting the instructions
given: connect the phase conductor to terminal L (brown color), the
neutral conductor (blue color) to terminal N.
>
To reduce the risk of death, personal injury, fire, electric shock,
falling parts, cuts / burns and other hazards, read all warnings and
instructions included with the appliance box as well as all labels.
>
Before installing or maintaining this equipment, follow the
instructions in this manual. For a residential installation, if you
are unsure whether to install or maintain the luminaire, consult a
licensed and qualified technician.
>
DO NOT INSTALL THE PRODUCT IF THE SAME IS DAMAGED
>
To prevent injury or damage to the assembly of this product,
make sure the conductors and screws are secure before connecting
the power.
>
Young children should be supervised to ensure that they do not
play with this product.
>
Handle the installation carefully to avoid any damage or breakage.
>
For installation, select an appropriate location away from liquids
and hazards. Make sure that the connection does not come into
contact with corrosive materials or surfaces, chemicals, etc.
>
Turn off the power and let it cool before cleaning. To clean, use a
clean, damp cloth. Never immerse the appliance in water.
>
Lamp replacement and maintenance: disconnect power and allow
fitting to cool down before cleaning or replacing.
>
Check that the supply voltage is correct compared to the
informative label of the luminaire.
INSTALLATION INSTRUCTIONS
_____________________________________________________________________________
①
Make sure that the power source is turned off.
②
Choose a suitable mounting surface to drill two holes on the
mounting surface according to the location of the installation holes
in the mounting bracket.
③
Insert the masonry plugs into the mounting surface.
Fix the mounting bracket onto the mounting surface with self-
tapping screws.
④
Connect main power cables with the cable from the driver, L to
L, N to N, making sure all the connections are tight.
④
Fix the lamp fixture onto the mounting bracket with the nuts.
④
Turn the power back on.
IMPORTANT
_____________________________________________________________________________
Ensure that:
1. The screws are tight.
2. Connections are correct. If in doubt, consult a qualified technician.
3. The connector is well placed. In case of doubt, consult a qualified
technician.
4. The light source and independent control device can be removed
by qualified person without permanent damage to the whole lamp.
5. This product contains one light source of energy efficiency
class E (energy class G luminaire).
[ EN ]
2
Publicidad
