Publicidad
Idiomas disponibles
Idiomas disponibles
of the implant before operat-
ing the machine.
Initial start-up
Before operating the device, you must
-
insert both rechargeable batteries,
-
Mount both pipes.
Caution! Risk of injury!
During assembly or disassembly
of the pipes (blower pipe, attach-
ment, flat nozzle), the device must
be turned off and all moving parts
must have come to a standstill.
Remove the batteries before car-
rying out any work!
Charging the battery
Make sure that the recom-
mended ambient tempera-
ture is observed during
charging. You will find this
in the instruction manual for
your Parkside X 20 V Team
series batteries and chargers.
If warm, allow the battery to cool
before charging.
Do not expose the battery to direct
sunlight for long periods and do
not place it on a radiator (max.
50°C).
1. Remove the rechargeable batteries (2)
from the device, if necessary.
2. Slide the rechargeable batteries (2)
onto the charger (15) up to the stop.
3. Plug the charger (15) into a socket.
4. Once charging is complete, disconnect
the charger (15) from the mains supply.
5. Remove the battery (2) from the
charger (15).
Remove/insert battery
1. To remove the battery (2) from the
device, press the release button on the
battery (2) and pull the battery out.
2. To insert the battery (2), push the bat-
tery (2) along the guide rail into the
device. You will hear it click into place.
Only insert the battery once
the battery-operated tool is
fully ready for use.
Fitting/removing
blower pipe and flat
nozzle
Never use the leaf blower
without the attachment.
There is a risk of personal in-
jury!
Pay attention to the correct assem-
bly of the blower pipe (4), other-
wise the leaf blower will not start.
Fitting the blower pipe
• Place the blower pipe (4) on the mo-
tor housing (3). The lock (7) clicks into
place.
Fitting the attachment
• Slide the attachment (6) onto the blow-
er pipe (4).
The button (16) on the blower pipe (4)
must slide into the guide rail (5) on the
attachment (6).
There are 3 possible settings for the at-
tachment (6).
The device can be set to your in-
dividual working height via these
3 settings. You should always work
GB
MT
31
Publicidad
