Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Step 7
Attach the Table Panel (A) to the
Table panel
Left Side Panel (C), Right Side
Panel (D) and Back Panel (E).
Ensure that the Cam Locks (2)
Right side panel
properly engage with the Cam
Screws (1). With a Phillips Screw
Driver, rotate the cam locks 1/2 turn
clockwise until snug. DO NOT
OVERTIGHTEN
Back panel
Left side panel
Middle side panel
Step 8
With the Middle Side Panel (F)
laying on a non-abrasive surface
install the right side Case Slide (9)
as shown on the drawing with 3
each 4X14 Screw (8). NOTE: See
drawing for proper placement of
the case slide.
Bottom panel
Step 9
Using a Phillips Screw Driver and 3
each Long Screw (5) attach the
Middle Side Panel (F) to the Bottom
Panel (B) as shown on the drawing.
Middle side panel
LLR60132/60134_080604
Page 9 of 33
Publicidad
