Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
2
Connecting the shelves to the tube
NOTE: ASSEMBLY SHOWN FOR 97 IN. OPENING HEIGHT.
The following assembly should be modified based on your
opening height. SEE CHART ON PAGE 5.
NOTE: Shelves (G) can be adjusted by moving the
wedges (J) up or down.
□ Place a wedge (J) (tapered or rounded end up) on the
long tapered tube (A) approximately half-way down.
□ Slide the shelf (G) down the tube and fit over the wedge (J).
□ Place another wedge (J) (tapered or rounded end up) on the
long tapered tube (A).
□ Slide another shelf (G) down the tube and fit over the
wedge (J).
□ This is the upper tube assembly.
3
Connecting the shelves to the tube
NOTE: Shelf (G) can be adjusted by moving the
wedges (J) up or down.
□ Place a wedge (J) (tapered or rounded end up) on the
medium tapered tube (B) approximately half-way down.
□ Slide the last shelf (G) down the tube and fit over
the wedge (J).
□ This is the lower tube assembly.
rounded end inserts
into shelf collar
rounded end inserts
into shelf collar
6
tapered end
A
G
J
G
J
tapered end
B
G
J
Publicidad
