Beper RI.411X Manual De Instrucciones página 15

EN
Double electric blanket Use instructions
PRODUCT AND ACCESSORIES Fig.A
1 – Blanket
2 – Outer slots
3 – Control
4 – Selector
5 – Light indicator
6 – Cord supply
USE INSTRUCTIONS
HOW TO USE
Do not use the electric blanket if folded, make sure is it correctly tight.
Tight the electric blanket between the mattress and fitted sheet.
The outer slots (2) are used to hold firmly the electric blanket to mattress, so it is tight.
Always cover the electric blanket with a sheet.
Completely unroll the cord supply (6).
Before connecting the plug check the mains voltage corresponds to the data specified on the label
of the electric blanket.
Set the selector (4) on desired position:
1 – MIN. level
2 – MAX. level
The light indicator (5) lights up.
Before going to bed turn on the electric blanket and make it heat for 30 minutes, 1 hour max.
During the night it is recommended to disconnect the control unit before sleeping.
Set the selector (4) on 0, the light indicator (5) switch off, and disconnect the cord supply (6) from
the socket.
CLEANING AND MAINTENANCE
wash at 30° Do not dry-clean do not iron
do not bleach Do not use the dryer
15