EQUATION IFH04-90-N Instrucciones De Uso página 30

Workshop Heater
HOW TO USE
Plug the appliance to a 400V 3N~ 50-60Hz socket. If you are not sure, we
advice you to contact a professional electrician for more details.
There is a 4 positions switch on your appliance: 0 (Stop) – Fan only - Fan &
heating low temperature - Fan & heating high temperature.
Turn the thermostat clockwise to increase the temperature.
Timer Operation :
In the postion denoted by the 'OFF', there will stop the heater
In the postion denoted by the 'ON', the timer continues to run but no power is
fed to the heater.
If timer fuction, rotate the timer konb in a clockwise direction to the time postion
as your required (180min at maximum)
IFH04-90-N
WARNING:
This heater is intended mainly to be used in
workshops, light industries or garages.
WARNING:
Your heater shall be used as portable
appliance only (thanks to respect all the
safety warnings given below)
Move the heater only by its handles
Never move the heater when it's working
Never let the heater under the rain or under
wet conditions.
Put the heater only on plane, clean & empty
surface.
WARNING:
Let a minimum distance of 1m between any
side of your appliance and any obstacle
(furniture or walls, for example)
29