serviplus MCL1540EEBBX Manual Del Uso Y Cuidado página 42

42
Washer
Washer pauses
during the spin
cycle
Can hear but not
see the water at
the end of the cycle
Performance
(washer)
Washer won't
operate
Movement inside
machine when
turned o
Possible causes What to do
The washer can be paused during the
This is
spin cycle to remove water containing
normal
soap more e ciently.
Pump is leaving water at inlet and it is
This is
diluted with soap and clean water.
normal
Possible causes What to do
Make sure cord is plugged securely into a
Washer is unplugged
working outlet.
Water supply Turn both hot and cold faucets fully on.
is turned o
Controls are not Check controls.
set properly
Lid is open – the Close lid and restart cycle, from the
safety feature is beginning if necessary.
preventing agitation
and spinning when
the lid is open
Check house circuit breakers/fuses.
The circuit breaker/
fuse is tripped/blown Replace fuses or reset breaker.
Washer should have a separate outlet.
Unplug washer, wait 2 minutes, plug back
Electronics need
in, and press START.
to be reset
Press START.
START was not pressed
Lid magnet is missing Call for service.
When the machine is turned o manually,
Shifting mechanism is
the shifter will disengage the motor
disengaging to return
before completely shutting down
to initial position
(only in spin).
(only in spin)
If the lid is raised before the motor is
disengaged, it will resume when lid is
closed (only in ll and wash).