Publicidad
Idiomas disponibles
Idiomas disponibles
EN
To access the advanced features, press simultaneously and hold down
Parameters
Menu
Parameters
General
Restrictions
Reset
22
General
T° calibration
Sound
Language
Restrictions
Max.temp.
Access control
PIN code
Reset
Reset
Back
To go back to start screen.
Menu EXPERT
T° calibration
To adjust the setpoint temperature depending on
the room temperature if a difference can be seen
0.0°
after 2 hours of heating. Calibration value in the
interval between -3°C below and +3°C above the
setpoint temperature.
Example: if T° of the room = 18°C and the set T° =
Sound
20°C, select -2.0°.
Enable
Disable
To enable and disable key sounds.
Language
To select the language.
English
To record the maximum setpoint temperature that
cannot be exceeded (in the interval between
Max.temp.
22°C and 30°C).
30.0°
To limit the access to controls. Full access, access
to temperature only, or no access can be
selected. In the latter case, access to unit controls
Access control
is prohibited.
All
Only temp.
To enable and disable entering personal access
No access
code to Expert Menu. When enabled, access to
Expert menu is coded. Your personal code can be
PIN code
entered here.
To disable it, go to Expert Menu, enter your code
Enable
and go back to Settings => Restrictions => PIN
Disable
code.
Reset all variables.
and
for at least 3 seconds.
Publicidad
