aflamo UNIQUE NH 100 Manual De Usuario página 4

Hard wiring installation for wall recessed
TURN OFF THE APPLIANCE COMPLETELY AND LET COOL BEFORE SERVICING. ONLY A QUALIFIED SERVICE
PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE.
HARD WIRING CONNECTION
If it is necessary to hard wire this appliance, a qualified electrician must remove the cord connection and wire
the appliance directly to the household wiring.
This appliance must be electrically connected and grounded in accordance with local codes if hard wired. In
the absence of local codes, use the current NATIONAL ELECTRICAL CODE in the Europe.
Fig.A
TURN OFF POWER FROM CIRCUIT BRACKER FIRST
A. Remove the cover plate from the right side bottom of the appliance by removing the three screws,
as shown above. (SEE FIG.A)
B.
Remove the wire connectors from the power cord. The power cord may be discarded. (SEE FIG.B)
C. Take the new cover plate supplied in the hardware bag and punch out the 7/8" (22.2mm) hole. And install
box connector through hole in cover plate. Feed wires through box connector.
D.
Using the wire connectors, connect the green ground wires (G), the common white wires (N)
together, then the hot black wires (L), (SEE FIG.C)
E. Re-install the cover plate using the three screws, as shown in FIG.4-1.
Fig.C
WARNING
www.aflamo.com
Cover Plate
Fig.B
Box connector
4