STEP 10
Attach the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
7
(x18)
#A21110
16
7
Attach the back panel so that
the bottom edge is even with
the bottom and aligned side to
side.
* raw surface is shaded
You
Tube