Descargar Imprimir esta página

Toparc FE-200 Instructivo De Servicio página 33

Publicidad

Idiomas disponibles

Idiomas disponibles

FE-200
2.7 Safety symbols marking
The safety symbols listed below are attached to the fume extraction system in a clearly visible and legible
form.
Symbol
2.8 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Power
Further measures can be found in the "Power source" operating instructions or in the documentation of further
peripheral devices.
3 Product description
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorisation.
• The device may only be used by qualified personnel (in Germany, see TRBS [Technical Rules for
3.1 Technical Data
Connection voltage
Drive power
Rated frequency
Filter surface
Connection diameters
Max. vacuum
Max. air volume flow
Sound pressure level LpA
Weight
Dimensions (LxWxH)
Tab. 1
Ambient temperature
Relative humidity
Tab. 2
Ambient conditions during operation
Meaning
Read and observe operating instructions!
WARNING
Operating Safety] 1203).
1
General data
1Measured according to the enveloping surface method according to DIN EN ISO 3744
3 Product description
115 V
1,1 kW
50 Hz/60 Hz
2
0.8 m
50 mm
19.000 Pa
200 m³/h
65 dB(A)
15 kg
500 x 210 x 500
0 °C bis + 40 °C
bis 90 % bei 20 °C
230 V
50 Hz
EN - 9

Publicidad

loading