Car and Driver CDC-570 Manual De Usuario página 6

2. Clean the area on the windshield where the Dash Cam will be installed.
3. Press the Suction Cup of the mount down onto the windshield where it has unobstructed
view of the road but does not interfere with the driver's view, then push the lock down to
secure it in place.
4. Turn the knob of the mount to adjust the camera's angle. Make sure the Dash Cam always
faces forward, and level with the vehicle and the road. Turn the Dash Cam on to check the
camera angle.
Lock
Knob
2-3 Connecting the Dash Cam to power supply
1. Connect one end of the supplied power cable to the Mini USB port of the Dash Cam.
2. Plug the other end of the power cable into your car's DC power outlet, and route the
power cable around the ceiling/passenger seat so that it does not interfere with driving.
Note
You may tuck the cable between the paneling of your windshield and/or A-pillar
space if available.
Note
Suction Cup
5 EN
-