Publicidad
5
PREPARATION - ELECTRIC POWER SUPPLY
Art. MFL2-SH
Art. MFL2-SH-115V
Art. MFL2-SH-115V-UK
WARNING!
• Check the integrity of the electric cutter cable.
• Observe the voltage (V) and frequency (Hz) indicated on the electric cutter
• For an extension, use only the IP67 (2P+T) socket and plug and a 3 x 2.5mm2 cable of the H 07 RN-F
type (max length 5 m).
• Check the placement of the power cable: it must not obstruct movement, and should not be subject
to shock or damage.
• Remove the electrical connection in any cases of maintenance or re-
placement of the diamond blade.
• Do not force the motor during processing.
• In the event of electric cutter malfunctions, contact an expert or our Technical Office.
6
CORRECT POSITIONING
1
Art. MFL2-SH-PU
Art. MFL2-SH-PU-115V
Art. MFL2-SH-PU-115V-UK
2
3
9
Publicidad
