Emos P5525 Manual Del Usuario página 4

4. Pressing the RANDOM button stops the random function and R will disappear from the screen.
Cancelling/Restoring a Previously Set Programme
Pressing the ON/AUTO/OFF button allows you to cancel/restore a preset programme; the display on
the screen changes in this order:
1. "ON" cancel a preset programme; the appliance will stay on the whole time.
2. "AUTO" restore a preset programme; the appliance will turn on and off automatically in accord-
ance with your settings.
3. "OFF" cancel a preset programme; the appliance will stay off the whole time.
Note:
A previously set random function will only activate if the timer socket is in AUTO mode.
If the random function is on, the auto on/off programme functions between 6 pm and 6 am are not
active.
Connection
1. Set the on/off programmes on the timer socket as described above.
2. Turn off the electrical appliance.
3. Plug the appliance's power cable into the timer socket and plug the timer socket into a mains
socket.
4. Turn on the appliance.
5. The appliance will now be turn on/off based on your set programmes until you manually cancel
the setting.
SAFETY WARNINGS
• If the screen isn't working, plug the timer socket into a 230 V AC socket and let it charge – the screen
should light up in about 2 hours and the socket should be fully functional. To recharge fully, leave
it in the socket for approx. 12 hours.
• The device must only be connected to and used with 230 V AC (~)/50 Hz electrical wiring fitted with
a protective contact in line with valid electrical regulations.
• Pay attention to the data on the type label of the appliances connected to the device. Maximum
input power of all connected electrical appliances must not exceed 3 680 W (max. current 16 A).
Max. inductive load: 2 A.
• Make sure that the lead-in protective conductor is not disrupted – the life of the user may be en-
dangered if the protective conductor is disrupted.
• Do not plug the device into sockets with a circuit breaker rated higher than 16 A. The socket may only
be switched with a maximum inductive load of 2 A. Always make sure the plug from the connected
device is fully plugged into the socket.
• Do not leave the connected electrical appliances unattended.
• Never tamper with the electrical circuits of the device or disassemble it! If the device is damaged
or non-functional, contact the seller.
• When cleaning the timer socket, always unplug it from power first. Then clean it using a dry cloth.
Do not use any cleaning agents or immerse the device in water!
• The recommended operating temperature is from -10 °C to +40 °C.
• Only plug rubber cables with an IP44 plug into the socket.
• The timer socket should be used in vertical position only to maintain its IP44 rating.
• This appliance is not intended for use by persons (including children) whose physical, sensory or
mental disability or lack of experience and expertise prevents safe use, unless they are supervised
or instructed in the use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
• Any use of the device not listed in the previous sections of the manual will result in damage to the prod-
uct and could present danger in the form of a short circuit, injury by electric current, etc. The device
must not be modified or otherwise restructured! Safety warnings must be followed unconditionally.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact
local authorities for information about collection points. If the electronic devices would be
disposed on landfill, dangerous substances may reach groundwater and subsequently food
chain, where it could affect human health.
4