Publicidad
Idiomas disponibles
Idiomas disponibles
"Ubinas" - ref. 634 13 42
Forbidden
1
2
3
1 - Flue.
2 - Stainless steel
funnel.
3 - The pipe casing
must equal at least
40 mm.
Figure 6 - Connection to flue
2.5. Preparing the flue pipe
Figure 7
If the existing chimney has a draught regulating system,
it will have to be removed or sealed in the open position.
a - Close the base of the throat of the chimney with a
sheet-metal plate or masterboard which will have been
drilled at the appropriate place and on which will be
fitted a small collar of diameter 180 mm.
b - Tightly fit the flue connection (Lenght X - 590) from
the stove to the small collar.
c - If the floor of the hearth is rough, place a metal plate
to ease the setting of the insert fire in the chimney.
The fans must be plugged on 230 V.
Technical manual "1250"
1
4
5
6
4 - Funnel-shape
fireproof material.
5 - Sealed flange.
6 - The pipe does not
exceed the flange and
the casing equals at
least 40 mm.
X
590
1 - Funnel-shape fireproof material.
a & c - Sheet-metal plate.
b - Lenght X - 590 pipe.
Figure 7 - Preparing the flue
2.6. Chimney built around the hearth
-
Follow the installation instructions provided by the
chimney manufacturer.
-
Avoid jamming the appliance in the hearth.
Check prorer operation of the moving parts (flap, valve,
door, etc...) to ensure they are not blocked by
installation materials (plaster, cement, etc...).
Installation instructions
1
7
Publicidad
