How To Use Your Burr Mill - Oster BVSTBMH23 Manual De Instrucciones

HoW to uSE YouR BuRR MILL

1. After all parts have been put into place, fill the Bean Hopper with coffee beans and
replace the lid.
2. Adjust the grind size by rotating the hopper counterclockwise
and then aligning the indicator on the hopper to your desired
grind size (Figure 2).
NOTE: Grind size setting will change the output volume of
grounds. Fine will produce less grounds and course will product
more grounds when the same volume (cup) setting is used.
3. Set the Cup Selection Dial to the desired amount of grounds
(Figure 3).
4. Press and hold briefly the Start/Stop button to start the grinding
process.
5. The unit will automatically stop when the selected volume has
been reached.
NOTE: You may also stop the grinding process at anytime by
pressing the Start/Stop button again.
6. Remove the Ground Coffee Chamber and lid and use the
grounds as needed.
7. Cleaning brush can be used to remove dust from Ground
Coffee Chamber Chute located behind the Removable
Ground Coffee Chamber (Figure 4).
E n g li s h -5
figure 2
figure 3
figure 4