Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING AND CONTENT
IMPOrTANT
is faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Description
Power Handle
Trimming Blade 1
Charging Stand
Operator's Manual
ASSEMBLY AND ADJUSTMENTS
WArNING:
important safety warning and instructions before using this tool.
WArNING:
removal of the battery pack.
INSTALLING AND REMOVING BLADES
WArNING:
locked or off position before any assembly, adjustments or changing accessories.
To Remove Blade (Fig 2)
1. Press both release buttons (8-fig 1) on either side of the installed blade at the same time.
2. Tilt the blade down away from the power handle to remove.
NOTE:
It is recommended to place the appropriate blade cover onto the blades when stored.
To Attach Blade (Fig 3)
1. Place the back end of the blade into the power handle.
2. Tilt the blade up into the power handle until it locks.
1.
8
:
Due to modern mass production techniques, it is unlikely the product
:
QTY
1
1
1
To reduce the risk of serious personal injuries, read and follow all
Always be sure that the tool is switched off before insertion or
Always remove battery pack from tool or place the switch in the
(fig 2)
2.
8V Cordless Garden Trim Kit
Operator's Manual
Description
Battery Pack (GLAB0820B)
Shearing Blade (Installed)
Charging Adaptor
GLGT08B
QTY
1
1
1
2.
1.
(fig 3)
Publicidad
