Andis CI-4P Manual Del Usuario página 3

TEMPERATURE SETTINGS
The styling temperature will depend on your hair's texture and condition.
Generally, for fine, bleached or hair in poor condition, use lower settings. For
normal hair, use higher settings. Once your comb reaches the temperature you
select, it maintains it all through styling.
CAUTION: Extreme care should be used when using this appliance on
damaged, relaxed or color treated hair.
Pressing
Comb
Adjustable
Heat Dial
TO USE YOUR ANDIS PRESS COMB
1. Shampoo, rinse, condition and towel dry hair.
2. Blow dry hair until completely dry.
3. Part hair into sections. Sections should equal one half the length of the comb
and one half the depth of the comb.
4. Rest comb on its stand on a smooth, flat surface. To pre-heat your Andis
comb, plug into an electrical outlet. (Please refer to the Operating Instructions
section of this manual for more detail).
5. Press the "ON" button and select operating temperature. The red power
indicator light will begin to blink as the comb heats up. When the comb
reaches the selected temperature, the red power indicator light will stop
blinking and remain on.
6. Grasp a section of hair and hold away from the scalp. Insert the press comb
into the hair section close to the scalp. The back of the comb straightens the
hair, so hold the section of hair firmly against the back of the comb.
Caution: Do not let the press comb touch your bare skin or scalp. Burns
may result. Do not use comb with aerosol or other flammable hair products.
7. Slowly turn the comb away from you and move it through the entire hair
strand until the hair ends pass through the teeth.
4
Temperature
Indicator
Red -
Power Indicator
"ON"
Button "OFF"
Button
8. Repeat procedure throughout all sections of hair until entire head is complete.
9. Press the "OFF" button and allow comb to cool.
USER MAINTENANCE
This appliance does not require special maintenance, cleaning or lubrication.
Keep surfaces free of dust, dirt, and hair products. If cleaning is necessary,
unplug comb and wipe with a damp cloth. If comb does not get hot, return for
servicing. Service only through Andis authorized service stations. To find an
Andis authorized service station near you log on to www.andis.com or
contact our customer service department: 1-800-558-9441 (U.S.) or
1-800-335-4093 (Canada).
TO CLEAN
Unplug comb and allow to cool completely. Wipe the comb with a soft, slightly
damp cloth.
TO STORE
Untwist cord before use. After use, allow unit to cool, re-wrap cord and store in a
safe place. Do not wrap cord around appliance. Do not hang the unit by the
power cord.
5