Hitachi Air Home 600 Manual De Instrucciones página 10

(4) Switch ON your air conditioner now. Once your
air conditioner is switched on, or reset the internal
settings (restore the factory settings) by remote
control, it will automatically set into pairing mode
for 10 minutes. Wi-Fi LED on air conditioner's
panel (see diagram in status indicator section) will
blink for 3 times repeatedly showing air conditioner
is in pairing mode. Wi-Fi LED keeps blinking till
communication with Wi-Fi router is succeeded.
When the airCloud Home module reset operation is
performed through the remote control, the pairing
mode can be entered without restarting the air
conditioner.
(5) Click "Change Wi-Fi Network", select the Wi-Fi
access point of the Built-in airCloud Home module
with SSID printed on the bundled SSID&KEY Label,
input password (the KEY). Click right arrow icon
on the screen top to continue for connecting your
smart phone with the Adapter.
(6) Waiting for the built-in airCloud Home module to
connect to your home router. When communication
is established, Wi-Fi LED on panel will be
continuously ON after blinking.
(7) Waiting for the Smartphone to connect with your
home network. If your Smartphone is connected
to another wireless network then click on Change
Wireless Network & select home network.
(8) Please assign a name to your registered air
conditioner. If you assign a custom name to your
air conditioner, it will not be compatible with your
smart speaker (integrated with Alexa or Google
Assistant), so we recommend that you select a
name from the pre-defi ned list.
(9) Your air conditioner has been successfully
confi gured.
(1) If communication cannot succeed within 10 minutes,
please follow the instructions of the App to complete
the pairing process again.
(2) If a user in the group has already registered some
air conditioning units, the other users in the same
group can also control the unit.
(3) If the air conditioning is not confi gured with router,
at power on unit enters into pairing mode every
time for 10 minutes with Wi-Fi indication blinking
for 3 times.
(4) If the air conditioning is already confi gured with
router, and router detection is available then at
power on, unit will skip the pairing mode & try to
connect to router.
(5) Please enter the SSID name of the air-conditioner
to proceed with the pairing process if unable to
scan QR code.
– 10 –