Descargar Imprimir esta página

Ryobi RLM18C32S25S Traducción De Las Instrucciones Originales página 6

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
NOTE: The battery pack LED indicator will
not work if the battery protection feature has
caused the battery pack to stop powering the
product. Release the on-off button or remove
the battery pack from the product and the
battery pack LED indicator will resume normal
function.
GENERAL MOWING TIPS
The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower to
suit the current condition of the lawn.
Suggested height
Grass
adjustment
conditions
Succeeding
First pass
Very thin / Dry
3
3 → 2
Thin / Dry
4
Medium /
4 → 3
5
Dense
For best performance, always cut off one-
third or less of the total height of the grass.
When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
New or thick grass may require a higher
cutting height.
If you wish to collect the grass cuttings for
disposal, remove the mulching plug and fit
the grass catcher making sure the top flap
is properly closed. Empty the grass catcher
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass catcher in this
case.
The product is designed to operate and cut
most effectively when moving forwards.
A higher cutting height will extend the run
time of the battery.
4
| English
Coverage
(maximum)
2.5 Ah
4 Ah
5 Ah
passes
battery
battery
battery
2
150 m
2
200 m
2
250 m
120 m
2
150 m
2
200 m
80 m
100 m
150 m
2
2
TRANSPORTATION AND STORAGE
Stop the product, remove the isolator key
and the battery. Make sure that all moving
parts have come to a complete stop. Allow
the product to cool down before storing or
transporting.
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store outdoors.
For transportation in vehicles, remove
isolator key and secure the product against
movement or falling to prevent injury to
persons or damage to the product.
2
Use extreme caution when lifting or tilting the
product for maintenance, cleaning, storage,
2
or transportation, the blade is sharp, keep
all body parts away from the blade while it
2
is exposed.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local
and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking. Check
with the forwarding company for further
advice.
MAINTENANCE
Use
only
original
replacement
parts,
attachments.
Failure
cause possible injury, contribute to poor
performance, and may void your warranty.
WARNING
WARNING
manufacturer's
accessories
and
to
do
so
can

Publicidad

loading