Klarstein Bellevin 12 Uno Manual De Instrucciones página 13

OPERATION
1 This is a dual zone wine cooler; the upper zone is for storage of white wine
with temperature from 7-18°C, the lower zone is for storage of red wine with
temperature range from 7-18°C.
2 When you are setting the temperature control, as you desire by pushing the
or button on the control panel. The temperature that you desire to set
will increase 1°F or 1°C if you push the
temperature will decrease 1°F or 1°C if you push the
Light can be turned OFF or ON by touching the "Light button. When
3 The
you push the two buttons for the first time, the LCD readout will show the original
temperature set at previous time (the temperature preset at the factory is
1 1°C/52°F)
4 The TEMP-ADJ button is set on one certain point when the cellar is off the
assembling line. When you want to change the temperature in the cabinet, please
select the right zone and change accordingly.
TROUBLESHOOTING
Symptoms Possible Cause
• Plug not put in
No cooling • Low voltage
• Fuse broken
• The refrigerator is
placed too close to a
heat source;
• Bad ventilation;
• The refrigerator is
Temperature placed too close to a
inside not cold heat source;
enough • Bad ventilation;
• Fans don't work;
• The door is not closed
tightly or opened too
frequently or for too
long time;
button once, on the contrary the
button once.
Solution
• Put in the plug
• Ensure normal voltage
• Change fuse
• Keep the refrigerator away
from sunshine or other heat
source;
• Place the refrigerator in the
area with good ventilation
and keep things away from
the fans;
• Check whether the plug is
connected or change the fan;
• Close the door tightly and
don't open the door too
frequently or for too long time.
EN
13