GE Profile Performance WPSE7003 Manual Del Propietário página 9

About cycle options.
B
EEPER
2
ND
R
INSE
E
XTEND
S
PIN
D
ELAY
1-8 Hrs.
About cycle status.
These cycle status indicator lights display what part of the cycle the washer is in.
PerfecTemp
SOAK WASH
PerfecTemp
AUTO BALANCE
BEEPER
Alerts you when the cycle is complete.
You can turn off the end-of-cycle beeper by pressing this pad.
2ND RINSE
Adds a second rinse to any cycle.
EXTEND SPIN
Extends the last spin of a wash cycle. This will extract more water from your clothes.
Clothes will be drier when you use this option.
DELAY 1-8 HOURS (on some models)
Use to delay the start of your washer for 1 to 8 hours. First choose your wash cycle and
any options. Then press this pad for the number of hours you want to delay the cycle.
Press the START/PAUSE pad to start the countdown.
The countdown time will be shown in the Est. Time Remaining display.
RINSE 2ND RINSE
PerfecTemp
PerfecTemp senses the incoming water temperature and adjusts the temperature of the
fill water.
The lid must be closed for PerfecTemp to work.
If your water is too cold, detergent will not dissolve effectively and clothes may not get
clean. If the water is too hot, fabrics could be damaged.
PerfecTemp adjusts these water temperature extremes for better washing performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
Auto Balance
The washer is sensing load distribution for an even spin.
AUTO BALANCE FINAL SPIN
9