Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Installation Guide
Before starting...
Download the application "Energeeks 3.0" on your mobile phone; it is
available on Google Play and APP Store. For the Wifi connection, the
camera only supports the 2,4Ghzhz frequency, (it does not support
5Ghz), it is necessary to connect the installed phone to the 2,4Ghz
network (only during the installation process), once the camera is
installed you can reuse 5Ghz.
Installation
1.
Plug the camera into the power supply using the supplied
transformer and wait a few seconds, the camera will turn on
and perform a test by rotating.
2.
Connect your phone to the 2.4Ghz Wi-Fi network of your
router.
3.
Open the Energeeks 3.0 app and tap the + sign at the top to
add a new device. Now select surveillance camera.
4.
Check if the camera led flashes quickly. If the led flashes
slowly or goes out, keep the camera reset pressed for a few
seconds until you hear the ' d ing dong' that confirms the reset.
The camera will retest and reboot into connection mode.
5.
When the led flashes quickly, please confirm "camera has
started" in the app and press next.
19
Publicidad
