Maxeon SunPower Reserve RESERVE-INV-1-P5-L1-INT Guía Rápida De Instalación página 2

SunPower Reserve
Home energy storage system
NEED MORE HELP?
If you would like to contact us directly, please visit our offcial website:
https://sunpower.maxeon.com
for more information.
1.0 Product Overview
(2)
(1) Grid connector
(3)
(2) Backup connector
(4)
(3) BAT +
(5)
(4) BAT -
(5) Battery circuit breaker
(6)
(6) PV connectors
(7) PV switch
(7)
(8) Wi-Fi port
(9) Communication ports
(10) LED display
2.0 Confirmation of Accessoires and Tools
2.1 Scope of Delivery
Inverter (RESERVE-INV-1-P5-L1-INT)
RESERVE-INV-1- TOP decoration Cable cover
P5-L1-INT (x1) plate (x1) (x1)
Grid-CT
AUX Connector (x1) M5*12 Screw (x16) Grid CT (x1)
Screw M4*10 (x2) Battery Battery Positive
Communication Power Cable (x1)
Cable (x1)
2.2 Additional Materials Required for Installation
Three-core outdoor DC Cable: PV1-F Conduits
copper cable Conductor cross-
Grid Cable: 6-8mm2 section: 4-6mm2
AC Backup Cable:
4-6mm2
4.2 Connecting the Grid Power Cable
1
1. 2.
Stripping 14mm
PE
L N
14mm
3
30mm
32mm
3.
4.3 Connecting the AC Backup Power Cable
1.
Approx. 24mm
For "L" and "N"
8mm
Approx. 26mm for PE
Three-core (L, N and PE) outdoor copper cable
Conductor cross-section: 4-6mm²
3. 1 2
Plug the connector into the socket and tighten firmly
4.4 Connecting the BAT Power Cable
BAT+
1.
BAT-
CAUTION 2.
Inverter side
Quick Installation Guide
(RESERVE-INV-1-P5-L1-INT)
548268 Revision B - Jun 2023
D W
(1)
(10)
(8)
(9)
Dimensions: WxHxD = 483x380x190mm
Inverter base (x1) PV MC4 connector Grid connector (x1)
pair (X2)
PV-CT
PV CT (x1) Grid CT Cable (x1) PV CT Cable (x1)
Battery Negative Grounding Cable Inverter Quick
Power Cable (x1) (x1) Installation Guide
(x1)
Ethernet Cables Cat5e, RJ45 Plugs PE Terminal
UTP, UV-resistant for
outdoor use
2
4.
2
4
2.
Insert the crimped conductors, L, N and PE into the
corresponding terminals and tighten the screws (torque
1.5±0.1N-m)
PE
L
Assemble the locking cap, threaded sleeve and swivel nut
together
Note:
Please ensure that the connector has been
correctly installed.
CAUTION
Switch OFF the battery breaker
which is located on the right BAT+
side of the battery
BAT+
Connect the BAT- wire first
(Black) then the BAT+ wire (Red)
BAT side
2.3 Installation Tools
PH2x150mm
Phillips Screwdriver
3.0 Installing the Inverter
3.1 Before installing the inverter ensure that the battery is properly installed. For more
details refer to Battery Quick Installation Manual or Safety and Installation Instructions.
3.2 Installing the inverter
1. Installing the base of the inventer
PH2x150mm
H
2.5Nm
1
6
5
4
7
Electric Shock Hazard:
Bore doing any electrical connection, ensure the PV switch, AC and BAT circuit breaker are switched OFF and
DANGER
cannot be reactivated.
4.0 Electrical Connections
BACK UP
Connector (x1)
4.1 Installing the PE cable
Description Breaker Specification
Grid side 32/40/50 A
Backup side 32A
WiFi Module (x1)
Position Designation
1 Housing
2 M5 terminal lug with protective conductor
3 M5x12 PH2 head screw
4 PE cable
You must protect each inverter with an individual AC
circuit breaker in order to ensure that the inverter can
disconnected safely.
DANGER
Selecting a circuit breaker and copper cross section
The maximum allowable grid circuit breaker specification is 50 A when the copper conductor cross section for grid
connection is 10 mm2 and factors influencing the ampacity of the cable, other influences on dimensioning must be
considered. You may use SunPower One installer dashboard to adjust the grid circuit breaker specification from 32A
DANGER
to 40A, otherwise the circuit breaker may trip under normal operation conditions.
BAT Power +
and Red Cable (positive)
1
3
2.
2
Danger to life due to short-circuiting of the battery
• Touching a shorted battery connection may result in lethal injuries due to electric shock and massive energy
release.
• Switch off the battery breaker which is located on the lower left of the inverter.
DANGER
• Connect both end of one battery power cable completely before connecting the next power cable to avoid
short-circuiting of the positive and negative battery pwer cables.
N
4.5 Connecting the PV Power Cable
1. Strip off the insulation.
PV1-F/UL-ZKLA/USE2
7mm
PV1-F/UL-ZKLA/USE2
7mm
3. Assemble the connectors.
2.6-2.9Nm
BAT-
BAT-
Please check if the cables are securely installed by pulling
outwards.
1.2x75mm
Flat-Head Screwdriver Wire Stripper Network Plug Clamp
2. Lock right screws
PH2x150mm
2.5Nm
screw
8
3
10
2
9
1
2
4
PH2x150mm
BAT Power -
and Black Cable (negative)
3.
1
PH2x150mm
4.5-5Nm
2. Assemble the MC4 cable ends.
4-6mm²
4. Check the polarities of the PV strings. Check
the open-circuit voltage is less than 580V.
Positive
Negative
Crimping Pliers Tape Measure
3. Lock left screws
PH2x150mm
2.5Nm
Lock Lock
right left
screw
11
12
3
2.5Nm
1.
4.
NOTICE
Positive terminal
Negative terminal
Crimp pliers to
cable ends