Publicidad
Idiomas disponibles
Idiomas disponibles
FIG. G
SAWING IN METAL
• Mount an appropriate saw blade.
• Proceed as described above.
WARNING: Use a cooling lubricant (cutting oil) to prevent
overheating of the saw blade or the workpiece.
MAINTENANCE
Your D
WALT power tool has been designed to operate over a
E
long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular
cleaning.
Cleaning
CAUTION: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap.
Do not use gasoline, turpentine, lacquer or paint thinner, dry
cleaning fluids or similar products. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Lubrication
LUBRICATING THE GUIDE ROLLER (FIG. B)
• Apply a drop of oil to the guide roller (8) at regular intervals to
prevent jamming.
FIG. H
7 7
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement)
should be performed by authorized service centers or other qualified
service personnel, always using identical replacement parts.
ACCESSORIES
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
E
accessories with this tool could be hazardous. To reduce the risk
of injury, only D
WALT, recommended accessories should be used
E
with this product.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center.
OPTIONAL ACCESSORIES
Consult your dealer for further information on the appropriate
accessories.
These include:
DE3241
Parallel guide
DE3242
Trammel bar
DT2048
Fine toothed cutting blade
DT2075
Coarse toothed cutting blade
DT2160
Metal cutting blade
DT2074
Flush cutting blade
Publicidad
