Hitachi SPX-RCKA Manual página 21

WEEKLY TIMER OPERATION
Step 2: Select Mode A or Mode B and activate or deactivate W
NOT
When setting ONCE TIMER, operation of WEEKLY TIMER is interrupted. After ONCE TIMER operation
O
is complete, WEEKLY TIMER operation will be activated.
O When ONCE TIMER is cancelled, operation of WEEKLY TIMER is also cancelled. Need to set WEEKLY
TIMER operation for activation.
After auto restart, WEEKLY TIMER operation is cancelled. Need to set WEEKLY TIMER operation for
O
activation.
Q How to select Mode A or Mode B of WEEKLY TIMER setting.
1
1. Press
2
(Normally Mode A will blink m rst).
2. Press (WEEKLY) button again.
3. Select Mode A or Mode B. Press
the remote controller towards the indoor unit for about 3 seconds. Timer
lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
3
Please ensure that the TIM R lamp lights up.
This indicates that Mode A or Mode B selection and active WEEKLY
TIMER have been conm rmed.
Q Setting non-active WEEKLY TIMER .
1. Direct the remote controller towards the indoor unit and press
(CANCEL) button.
1
Beep sound will be emitted from indoor unit and TIMER lamp will be
OFF. Reservation indication on remote display will also disappear.
This indicates that non-active WEEKLY TIMER has been conm rmed.
To activate back the setting of WEEKLY TIMER , repeat the steps for
O
"How to select Mode A or Mode B of WEEKLY TIMER setting".
– 21 –
(WEEKLY) button.
KLY TIM R.
and blink on the display.
and blink on the display.
(SEND) button while directing