tomado TKS0101B Instrucciones De Uso página 14

WEIGH
Put the appliance on a flat and stable surface. This kitchen scale has sensor touch control. The
keys are activated by the touch of a finger. The sensor touch control functions also with the lid/
bowl on the scale.
Switch the scale on by touching the ON/TARE key. The entire display
will light up.
Wait about 2 seconds untill «0 g» appears on the display.
The kitchen scale is now ready for weighing.
Place the item to be weighted directly on the scale. The weight there of is displayed immediately.
To select a different measurement unit press the
UNIT key to change it accordingly to:
g = grams, lb = pounds, oz = ounces, ml = milliliter.
The scale can accept a maximum load of 10.000 grams or 10.000 milliliters. The weight
measurement is displayed in 1 g divisions. And the scale has a 'tara' adding function.
Remove the overweight when «EEEE» appears in the display. NOTE: The total weight placed on
the scale can not be more than 10.000 grams.
ADDING FUNCTION
With the adding function you can reset the display to «0 g» after placing a product. This allows
you to weigh in a bowl. Do as follows:
1. Place an empty bowl on the scale.
2. Press the scale on with the ON/TARE key and wait till «0 g» appears on the display.
3. Place the first product you wish to weigh in the bowl.
4. Read the weight shown on the display.
5. After weighing, press the ON/TARE key to reset the scale to «0 g» and you can add the next
ingredient.
By repeating step 3, 4 and 5 you can weigh multiple ingredients (e.g. baking ingredients).
Note: «EEEE» appears in the display if more than 10.000 grams in total is placed on the scale.
EN - 14