AEG LB 4713 BT Instrucciones De Servicio página 49

If the devices have been successfully paired, the indicator lamp briefly flashes rapidly and
then slowly.
NOTE:
• Depending on the device manufacturer, you need to perform the registration (PAIR-
ING) again to connect the devices.
• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile phones) get-
ting released in the future.
• To ensure an optimal connection, make sure that the battery of your player is com-
pletely charged.
• Some of the mobile phone brands have an energy-saving mode. Deactivate the
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay activated in your player.
Observe the operation manual of your player.
• If a mobile phone on which you are playing music receives a call, the music will be
interrupted. The sound however is not played back via the speaker.
Operation
The device is equipped with multi functional buttons. For different functions press the
respective button briefly or press and hold.
On/Off (4)
• To switch the unit on, slide the ON/OFF switch to "ON".
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• The devices were already connected with each other.
• Bluetooth is activated in your player.
• To switch the unit off, set the ON/OFF switch to "OFF". The units are disconnected.
NOTE:
To save the battery, switch off the speaker when not in use.
English
49