Publicidad
Idiomas disponibles
Idiomas disponibles
PACKAGE CONTENTS
Part
Description
A
Jack
B
Pump Handle
SAFETY INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using.
The owner and/or operator of this equipment shall have an understanding of this jack and safe operating procedures before
attempting to use. The owner and/or operator shall be aware that the use and repair of this product may require special skills and
knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is
authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any jack that appears
damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately. If you suspect that the
jack was subjected to a shock load (a load suddenly dropped unexpectedly upon it), immediately discontinue use until the jack has
been checked by a factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is
recommended that an annual inspection be done by qualified personnel. Labels and owner's manuals are available from manufac-
turer.
PRODUCT DESCRIPTION
Hydraulic Floor Jacks are designed to lift, but not support, one end of a vehicle. Hydraulic Floor Jacks must be used in conjunction
with a pair of appropriately rated jack stands.
NEVER
use an automotive jack as a stand-alone device. After lifting, immediately support the lifted load with a pair of
appropriately rated vehicle support stands.
1. READ, STUDY AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS PRIOR TO USE.
2. DO NOT OVERLOAD THIS JACK BEYOND THE RATED CAPACITY.
3. THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL SURFACES CAPABLE OF SUSTAINING THE LOAD.
4. THIS IS A LIFTING DEVICE ONLY. THE LOAD MUST BE SUPPORTED IMMEDIATELY BY JACK STANDS.
5. DO NOT GET UNDER OR ALLOW ANYONE UNDER THE VEHICLE UNTIL IT HAS BEEN SUPPORTED BY JACK STANDS.
6. LIFT ONLY ON AREAS OF THE VEHICLE AS SPECIFIED BY THE VEHICLE MANUFACTURER.
7. CENTER LOAD ON SADDLE PRIOR TO LIFTING.
8. SOME VEHICLES REQUIRE AN ADAPTER TO PROPERLY ENGAGE THE FRAME FOR LIFTING. USE VEHICLE MANUFACTURERS
INSTRUCTIONS ON PROPER LIFTING.
9. NO ALTERATIONS TO THE JACK SHALL BE MADE.
10. ONLY ATTACHMENTS, RESTRAINTS, OR ADAPTERS SUPPLIED BY THE MANUFACTURER SHALL BE USED.
11. FAILURE TO HEED THESE WARNINGS MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
Quantity
1
1
WARNING!
2
Publicidad
