Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm Functions
Setting the alarm time
Set the alarm time by turning the time setting wheel (seen from the back of the
alarm clock) in direction of the arrow.
Alarm
The alarm has two crescendo steps and two different intervals. This means that
the alarm volume gradually becomes louder.
Activating the alarm
Push the "Alarm on/off" switch at the side upwards. A red field in the slide
switch indicates that the alarm is ready to wake up.
Alarm interruption (snooze function)
Briefly press the top button. The alarm signal is interrupted for approximately
5 minutes and then sounds again. The snooze function can be repeated for
as long as the alarm is activated until 45 minutes after the alarm time. The
alarm signal is automatically exited after 2 minutes, if it is not interrupted or
deactivated.
Switching off the alarm signal
In order to switch off the alarm, press the "Alarm on/off" switch at the side
downwards. Das rote Fenster im Schiebeschalter ist nicht mehr sichtbar.
Illumination
With every first further alarm the lighting is switched on automatically for 5
seconds. For the duration of every button press the clock face lighting is activa-
ted, and it remains activated for approx. 5 seconds.
12
Technical data
Working temperature
Power Supply
lntegrated radio receiver
Antenna
Sensitivity of reception
Setting time with interference-free
Summertime/wintertime
Time storage
Battery
Size clock
Size clock face
Weight
Subject to technical modifications
–5° C to +55° C
1 x 1.5 Volt
DCF 77 at 77.5 kHz
Internal ferrite antenna
≤ 70 μV/m
3–5 minutes reception
Automatic adjustment
Effective in case of reception
interference
AA Alkaline battery 1.5 V
(with Battery)
13
Publicidad
