Sylvania LC370SS8 M Manual Del Usuario página 33

PC Settings
This function lets you adjust the PC screen position, clock and phase during
PC input.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DETAIL", then press
[ENTER].
3
Use [Cursor K / L] to select "PC settings", then press
[ENTER].
4
Use [Cursor K / L] to select the setting you want to
adjust, then press [ENTER].
All manuals and user guides at all-guides.com
Detail Detail
Closed Caption
V–chip
PC Settings
HDMI1 Audio Auto
PC Settings PC Settings
Auto Adjustment
Horizontal Position - -
Vertical Position - -
Clock - -
Phase - -
5
Adjust the setting.
Auto Adjustment
Use [Cursor K / L] to select "Adjust", then press
[ENTER].
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted.
Horizontal Position, Vertical Position
Use [Cursor s / B] to adjust.
Horizontal Position
0
H. Position
Adjust Move Enter
ENTER
Vertical Position
V. Position 0
Adjust Move
ENTER Enter
Clock, Phase
Use [Cursor { / B] to adjust the "Clock" setting to
stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Clock
Clock 0
Adjust Move Enter
ENTER
Phase
Phase 0
Adjust Move Enter
ENTER
6
Press [SETUP] to exit.
Note:
• Adjust the "Phase" setting after the "Clock" setting has
been properly adjusted.
• You may not obtain an appropriate screen with auto
adjustment for some signals. In this case, adjust the
settings manually.
Auto Adjustment
Auto Adjustment
This function automatically Cancel
adjusts the position, clock and
Adjust
phase of the picture element.
Cursor s Cursor B
to move PC to move PC
screen left screen right
to move PC to move PC
screen down screen up
Cursor s Cursor B
to decrease to increase
setting value setting value
EN
33