Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the TV holder
1. Remove the fabric back cover from the back of your TV.
2. Insert a screw into the TV holder at a right angle, as shown in the figure below.
3. Tightly fasten the TV holder and screw assemblies
to the two holes at the top of the back of the TV.
- Use a manual screw driver. Fastening a
screw with excessive force using an electric
screw driver may damage the Holder.
4. Tie the Holder cord to the Holder. Ensure that the
Holder cord is in the middle of the TV holder cord
and that it is stretched tight.
Fastening direction
English - 17
Publicidad
