LG SA182CL SC0 Manual Del Propietário página 9

Wireless Remote Controller
The controls will look like the following.
Signal transmitter
ON OFF
AUTO CLEAN
STEP
Operation Mode
Cooling Operation
Auto Operation
Healthy Dehumidification Operation
Air Circulation
NOTE
To use the functions printed in blue at the bottom of the buttons press 2
button. Pressing the 2 F button activates the blue printed function of the respective button. To cancel the function
nd
press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds.
CANCEL
SET
ON/OFF BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.(Including 'Air
Circulation Mode')
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTION BUTTON
Used to select fan speed in four steps low, medium,
high and natural wind.
HORIZONTAL VANE CONTROL BUTTON
Used to set the desired vertical airflow direction.
VERTICAL LOUVER CONTROL BUTTON
Used to set the desired horizontal airflow direction.
AUTO CLEAN BUTTON
AUTO CLEAN
Used to set auto clean.
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
ON
OFF
TIME SETTING BUTTONS
Used to adjust the time.
CANCEL
TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
SET
RESET BUTTON
Used prior to resetting time.
PLASMA BUTTON
Used to start or stop the plasma-purification.
LED LUMINOSITY BUTTON
Used to adjust LED luminosity.
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
ENERGY SAVING COOLING BUTTON
Used to save Energy.
JET COOL BUTTON
Used to start or stop the speed cooling.
The Jet Cool operates fan in super high speed
in cooling mode.
2nd F BUTTON
Used prior to using modes printed in blue at the bottom
of buttons.
F button first and then the required function
nd
Operating Instructions
Owner's Manual 9