Publicidad
Idiomas disponibles
Idiomas disponibles
Control setting
1. Timer key
2. Fan speed selection key
3. Up key
When the device is powered on for the first time, you will hear a small
the device will change into standby status.
1. Power Key: Press this key to turn the device on and off . In case of power
on, press the key to turn the device off. In case of power off, press the key
to turn the device on .
2. Mode Selection Key: In case of power on, press the key to switch between
the modes cooling → dehumidifying → fan → cooling → ...
3. Sleep Mode:
In cooling mode, press the up and fan keys to turn on sleep mode,
then the unit will work in an energy-saving quiet mode.
4/5. Up Key and Down Key: Press these two keys to change the
temperature or time setting, operate as follows:
While setting the temperature, press the up or down key to select the
required temperature (not available in fan or dehumidifying mode). While
setting the time, press the up or down key to select the required time.
6. Fan Speed Selection Key:
In cooling mode, press this key to select high or low fan speed. In fan
mode, press this key to select high or low fan speed. In dehumidification
mode, pressing the key has no effect and the fan will always run at low
speed.
7. Timing Key:
In case of power on, press this key to close the timer. In case of power off,
press this key to open the timer. Press the key when the timer symbol
flashes, press the up and down keys to select the required timer value.
Timer values can be set between 1-24 hours and the timer value is
adjusted up or down by one hour.
4. Display window
5. Down key
11
6. Mode selection key
7. Power key
beep,
and
Publicidad
