Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
PACKAGE CONTENTS (see figure
① – base; ② – legs (5 pcs.); ③ – wheels (5 pcs.); ④ – gas lift;
⑤ – gas lift cover; ⑥ – seat; ⑦ – backrest; ⑧ – lumbar support
mechanism; ⑨ – headrest; ⑩ – plug; ⑪ – hexagonal wrench;
⑫ – M8×25 screws (5 pcs.); ⑬ – M6×25 screws (2 pcs.);
⑭ – M6×16 screws (5 pcs.); ⑮ – protective gloves (2 pcs.);
⑯ – quick start guide; ⑰ – diagram.
DESCRIPTION
Purpose. The Lorgar Grace 855 is an ergonomic gaming chair
on wheels that provides the user with a comfortable sitting or
lounging position. For household use.
Design features. Upholstery: mesh (polyester). Seat: width
53 cm, depth 54–59 cm. Backrest: 55×50,5 cm. Base: aluminum
alloy, Ø 71 cm. Wheels (Ø 60 mm), armrests: polyurethane.
Weight: 26 kg.
Models (colors): LRG-CHR855B (black); LRG-CHR855RB
(black, red).
Functional features. Gas lift: class 4; maximum load 150 kg.
Adjustable height: seat – 51–57 cm from the floor; total height –
130–136 cm. Mechanism: multiblock, tilt adjustment and locking.
Armrests adjustable in 3 directions. Backrest recline angle:
90–112° (plus tilt 18°). Adjustable headrest and lumbar support
mechanism. Operating conditions: temperature 0...+45 °C,
relative humidity 45–75 %. Storage conditions: temperature
−20...+45 °C, relative humidity 45–75 %.
Carefully unpack all the parts of the chair. Check the presence
and quantity of all accessories (see figure
the "Package contents" section above).
Wear protective gloves when working. Use the manual tool to
tighten the screws (hexagonal wrench is included).
WARNING! Do not use mechanical tools (electric screwdrivers),
do not overtighten the screws. This can damage the mounts.
Follow the steps below in sequence (see figure
diagram).
1
Attach the legs to the base.
2
Insert the wheels into the base.
3
Place the base on the floor with the wheels, insert the gas lift
in it. Put the cover on the gas lift.
4
Install the seat on the gas lift.
5
Attach the backrest to the frame of the chair.
6
Attach the lumbar support mechanism to the frame.
7
Attach the headrest to the backrest. Cover the attachment
point with the plug.
WARNING! After two weeks of use, check that all screw
connections are tight.
ADJUSTMENT
Seat height: see figure
C
lower the seat; stand up from the chair to raise the seat.
Backrest recline and chair tilt: see figure
Lumbar support mechanism: see figure
Armrests: see figure
G
in the diagram.
Seat depth: see figure
F
move the seat away from the backrest; stand up from the chair so
the seat is back to the backrest.
SAFE USE GUIDELINES
To avoid personal injury and damage to the chair, it is prohibited:
to use the chair for purposes other than its intended use;
to sit on the edge of the seat, on the armrests;
to stand on the chair;
to sit in a chair with another person;
to lean the whole body only on the backrest of the chair;
2
A
in the diagram)
ASSEMBLY
A
on the diagram and
on the diagram. Stay in the chair to
D
in the diagram.
E
in the diagram.
on the diagram. Stay in the chair to
to recline in the chair so that the base rests on only two wheels;
to place your hands and fingers where the backrest attaches
to the seat;
to move abruptly in the chair while adjusting it;
to exceed the permissible load on the chair;
to push on the reclined backrest, push or spin the chair when
there is a person in it.
Do not expose the chair to high temperatures, do not leave it near
heaters or in the sunlight for a long time. In the event of a
malfunction, contact the service center.
Every six months, check that the screw connections are tight. For
regular cleaning, use a soft cloth (dry or slightly dampened with
water). Do not use abrasive materials or harsh detergents. If the
upholstery is very dirty, use a detergent specifically designed for
upholstery, according to the instructions on its packaging.
If the scope of package contents does not match the list on the
diagram, contact the point of purchase. If squeaking occurs,
check that the screw connections are tight.
In the event of any malfunction, contact the point of purchase or
a service center. Do not attempt to repair the product yourself.
The warranty period starts from the moment of retail sale of the
product to the end buyer. To obtain warranty service, contact the
point of purchase and provide the product with the proof of
payment. The warranty period and service life is 2 years, unless
otherwise provided by local law.
The manufacturer's warranty for the Lorgar chairs does not cover:
the materials prone to wear and tear (upholstery, wheel and
armrests coating, belts);
the defects resulting from natural wear and tear or natural
aging of the product (scratches, dents, tears, breaks);
B
in the
the damage caused by failure to comply with the
recommendations set forth in the quick start guide and the full
user's manual;
the damage caused by improper transportation or handling by
the end buyer.
WARNING!
lorgar.eu/warranty-terms.
The information provided herein is subject to change without
notice to users. Up-to-date information and detailed product
descriptions, certificates, warranty terms are available in the
complete user manual at lorgar.eu/drivers-and-manuals.
Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios
Athanasios, 4101, Limassol, Cyprus. Made in China.
CARE AND MAINTENANCE
TROUBLESHOOTING
WARRANTY SERVICE
Full
warranty
information
ADDITIONAL INFORMATION
is
available
at
Publicidad
