MAKING COFFEE
CAUTION: DO NOT open the lid during brewing as there is the potential risk of scalding.
1.
Put the plug into the power socket.
2.
Move the switch to I. The light in the switch will come on.
3.
Shortly afterwards, coffee will start to drip into the carafe.
4.
When it's done, the hotplate will keep the carafe warm. After 40 minutes, the hotplate will
shut down.
5.
About 40 minutes after brewing finishes, the appliance will shut down.
6.
Move the switch to 0. The light in the switch will go off.
7.
Unplug, and let the appliance and carafe cool down fully before cleaning, or for about 10
minutes before refilling.
8.
After about 40 minutes, chemical changes will affect the taste of the coffee.
A QUICK CUP
You can remove the carafe at any time. To prevent the filter holder overflowing, replace the
carafe on the hotplate within about 20 seconds.
CARE AND MAINTENANCE
1.
Unplug the appliance and let it cool.
2.
Tip the contents of the filter holder into the bin.
3.
Clean the outside surfaces of the appliance with a damp cloth.
4.
Press the lever at the rear of the carafe lid, above the handle, to open the carafe lid.
5.
Hand wash the carafe and filter holder.
6.
With the filter oriented as shown in FIG A, lower it into the coffee maker. The lid will not
close unless the filter holder is correctly fitted.
7.
Close the lid, and press down to lock it.
DESCALE REGULARLY
Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on
the package of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn't be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
4