Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information (continued)
USER INSTRUCTIONS
1.
2.
be replaced with original "OEM" (original equipment manufacturers) parts only.
3.
IMPORTANT: Always unplug the power cord before cleaning the unit. Do not use any abrasive cleaners on
the unit.
4.
GROUNDING INSTRUCTIONS
connecting three-blade grounding-type plugs to two-slot receptacles. The
green grounding lug extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box. The adapter
should not be used if a three-slot grounded receptacle is available.
(Note: Grounding adapter use prohibited in Canada)
LOCATING YOUR FIREPLACE
MANTEL INSTALLATION
Please refer to the detailed instructions that came
with the mantel that you purchased.
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS
OR LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
ELECTRICAL CONNECTION
A 15 Amp, 120 Volt, 60 Hz circuit with a properly grounded outlet is required to operate this appliance. Preferably,
breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6 ft (1.8 m)
cord. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable
power tap (outlet/power strip).
WARNING: Electrical outlet wiring must comply with local building codes and other applicable
SPECIFICATIONS
Fireplace Insert dimensions
(w x d x h)
Voltage
Frequency
Watts • Amps.
electrical system which has been under water.
Grounding Pin
Cover of Grounded Outlet Box
C
Adapter
Grounding Lug
Metal Screw
Cover of Grounded Outlet Box
27.75" x 8" x 17.25"
70.4 cm x 20.2 cm x 44 cm
120 V
60 Hz
1440W • 12A
A
B
3
Publicidad
