Publicidad
Idiomas disponibles
Idiomas disponibles
button to display the PIN CODE dialogue window, and input the correct pin code with the numeral
buttons; finally press OK button to lock the selected service with an icon
You shall have to enter the correct pin code before you can enjoy your program. If you want to cancel
the Lock operation, press green button again to pop out the widow, and enter the correct pin code, then
the service shall be unlocked and the icon
Press Yellow button to delete the service: Press
button to pop out the message box "Are you sure to delete it?", and at last press OK button to confirm
the deletion, or EXIT button to cancel it and quit.
3. SCAN
You can perform the scan of channels when you enter this SCAN submenu and conduct some setup
operation.
SCAN type: Manual Scan/ Auto Scan/ Nit Scan
Channel: Input the channel number with numeral buttons on the remote control.
Update mode: Append/ Replace
If you choose Append, the new channel will be added at the end of the channel list.
Note: The channels that have existed shall not be added as new ones.
If you select Replace, all the existing channels shall be replaced by latest scanned ones.
3.1 Manual Scan
If select Manual Scan, first enter the right channel
number, then choose an Update mode, and next
press OK button, after that the screen shall display
a Message Box saying please wait... and at last
it shall start scanning. You can press EXIT button
to stop and exit.
The screen shall show N channel found when
the scan has been finished (N refers to the
number of channels). Press EXIT button to quit.
3.2 Auto Scan
Select Auto Scan, then choose an Update mode,
and next press OK button, and after that the
screen shall present a Message Box indicating
Scan Process as scan goes on. You can press
EXIT button any time to exit.
The Message Box of Scan Process shows the
scan progress by percentage. TV channels and
radio channels shall be displayed in two columns
respectively.
There shall be such words N channel found (N
refers to the number of channels) on the screen
as soon as the scan is over. Press EXIT button to
quit.
3.3 NIT Scan
When Select NIT Scan, input the proper channel
number, and choose a proper Update mode, then
press Ok button. In no time a message Please
wait...shall appear in the Message Box and then
scan shall begin. You can push EXIT button to
quit.
The Message Box of Scan Process shows the
scan progress by percentage. TV channels and
radio channels shall be displayed in two columns respectively.
Bmt-76.p65
Operation
shall disappear. The default password is "0000".
-35-
35
(lock) appearing on the left.
button to choose a service, then the yellow
06-4-10, 19:33
Publicidad
