Whirlpool WSIP 4023 PFE Instrucciones De Uso página 6

LOADING THE RACKS
CUTLERY RACK
UPPER RACK
Load delicate and light dishes: glasses,
cups, saucers, low salad bowls.
The upper rack has tip-up supports which
can be used in a vertical position when
arranging tea/ dessert saucers or in a
lower position to load bowls and food
containers.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be
adjusted: high position to place bulky
crockery in the lower basket and low position
to make the most of the tip-up compartments
by creating more space upwards.
The upper rack is equipped with a Upper
Rack height adjuster (see figure), without
pressing the levers, lift it up by simply holding
the rack sides, as soon as the rack is stable
in its upper position. To restore to the lower
position, press the levers (A) at the sides of the rack and move the
basket downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
6
The third rack was designed to house
the cutlery.
Arrange the cutlery as shown in the
figure.
A separate arrangement of the cutlery
makes collection easier after washing
and improves washing and drying per-
formance.
Knives and other utensils with sharp
edges must be positioned with the
blades facing downwards.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
– to fold the flaps there is needed to rotate it and slide flaps down or
pull it up and attach flaps to the snaps.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery
etc... Large plates and lids should ideally be
placed at the sides to avoid interferences
with the spray arm.
The lower rack has tip-up supports
which can be used in a vertical position
when arranging plates or in a horizontal
position (lower) to load pans and salad
bowls easily.
(loading example for the lower rack)
POWER CLEAN®
Power Clean® uses the special water jets in
the rear of cavity to wash more intensively
the high dirty items. The lower rack has
a Space Zone, a special pull-out support in
the rear of the rack that can be used to
support frying pans or baking pans in
upright position, thus taking up less space.
Placing the pots/casseroles faced
to the Power Clean® component
please activate the POWER
CLEAN® on the panel.
How to use Power Clean®:
1. Adjust the Power Clean® area
G folding down the rear plate
holders to load pots.
2. Load pots and casseroles
inclined vertically in Power
Clean® area. Pots have to be
inclined towards the power
water jets.
The side foldable flaps can be
fold or unfold to optimize the
arrangement of crockery inside
the rack.
Wine glasses can be placed
safely in the foldable flaps by
inserting the stem of each glass
into the corresponding slots.
Depending on the model:
– to unfold the flaps there is
needed to slide it up and
rotate or release it from the
snaps and pull it down.