Página 3
Connect the Ignition Wire Ÿ to the Ignitor. Conectar el cable de Ÿ encendido a la encendedor. Branchez le câble Ÿ d'allumage à l'allumeur...
Página 6
□ Before assembly, inspect Regulator/Valve for damage, dirt or debris accumulation. Clean out if present. □ With knob pointing down, insert Regulator/Valve into end of Burner. Notch in Regulator/Valve MUST engage dimple on end of burner. □ Once Regulator/Valve has completely engaged Burner, turn Regulator/Valve clockwise to lock in position with knob pointing up. □...
Página 7
EMERGENCIES: If a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department. Troubleshooting Prevention/Solution is turned on. Problem Possible Cause Burner will not Light. • Out of Propane • Replace Cylinder. • Retighten cylinder. •...