MASSAGER OPERATING INSTRUCTIONS
• Check the availability of the device and components.
• Fully charge the massager before use.
• If you have long hair gather it on top of your head before use.
• Turn on the massager only after you put it on your neck.
• Do not start the device if the power and power supply voltage are out of
range.
HOW TO CHARGE THE DEVICE
1. Connect the USB port of the massager to an external power source using the
USB cable.
2. When charging, the LED will turn red. When the device is fully charged this
indicator will turn purple. The device uses a highly effective lithium battery.
3. The battery is a highly effective lithium battery.
OPERATING PROCEDURES
1. Hold the handles with both hands, put the Massager on the cervical spine,
adjust and find convenient position suitable for your neck.
2. Pull the handles with both hands and adjust position of the massage heads.
3. Start the device by pressing and holding the button
: After the device is
switched on the LED goes purple.
4. To change direction, press the
button.
5. To complete usage press and hold the
button. The LED blinks off.
6. Heating is enabled automatically when the massager is turned on. The
button turns the heating on and off.
7. The massager automatically stops working in 20 minutes. To resume work
press and hold the
button.
8. Flashing red LED informs about low battery charge. Please charge the
device.
4